---
title: RSI vs MACD: Key differences and how to use them together
url: https://dhan.co/blog/technical-analysis/rsi-vs-macd/
page_type: blog_post
last_updated: 2026-01-19
---

# RSI vs MACD

The two indicators that are most prominent in the momentum and trend analysis are the Relative Strength Index (RSI) and the Moving Average Convergence Divergence (MACD ).

In the hustle and bustle of technical analysis, traders are constantly after tools that can assist them in reducing the noise of price swings.

These two are technically momentum indicators, but not interchangeable. Their perspectives on price action are entirely different. In this blog, we will explore the RSI vs MACD and how to use them together to strengthen the trading approach.

## Relative Strength Index (RSI)

The Relative Strength Index (RSI) is a type of momentum oscillator developed by J. Welles Wilder Jr. It measures the speed and fluctuation of price movements, ranging between 0 and 100. RSI is primarily used to identify overbought or oversold conditions within a market.

The standard RSI calculation is based on a 14-period setting (i.e., 14 days on a daily chart). It is calculated by the average gains and average losses in that period. The formula is:

RSI = 100 - [{100}/{1 + RS}]

Where RS (Relative Strength) is the average gain divided by the average loss.

Check out the [list of stocks with RSI between 30-70](https://dhan.co/stocks/market/stocks-with-daily-rsi-between-30-to-70/).

### Interpretation

The RSI readings can lead to the following interpretation:

- **Overbought/oversold**: RSI readings above 70 indicate an overbought condition, which may signal that the asset's price is due for a correction or pullback. Readings below 30 indicate an oversold condition, suggesting the possibility of a bounce or reversal.
- **Divergence**: One important signal that RSI reading indicates is divergence. If the price makes a new high but the RSI makes a lower high, it's bearish divergence, indicating weakening momentum. Conversely, if the price makes a new low but RSI makes a higher low, it's bullish divergence, indicating strengthening momentum.
- **Trend Confirmation**: When in an uptrend, RSI tends to range above 30 and often touches 70. During a downtrend, it tends to stay below 70 and often reaches 30.

## Moving average convergence divergence (MACD)

The [moving average convergence divergence](https://dhan.co/blog/technical-analysis/what-is-macd/) (MACD) is a trend-following momentum indicator developed by Gerald Appel. It displays the relationship between two moving averages of a security's price. The MACD is composed of three main components:

- **MACD Line**: The difference between the 12-period EMA and 26-period EMA.
- **Signal Line**: A 9-period EMA of the MACD line
- **Histogram**: The difference between the MACD line and the Signal line.

The formula for the MACD calculation is:

MACD = 12-day EMA − 26-day EMA

### Interpretation

The MACD analysis can lead to the following interpretation:

- **Crossovers:** A bullish signal is formed when the MACD line crosses over the signal line, indicating an upward momentum. A bearish signal occurs when the MACD line crosses below the signal line, indicating a negative or downward momentum.
- **Centerline Crossovers**: When the MACD line crosses above the zero line, it means that the 12-period EMA has crossed above the 26-period EMA, indicating bullish momentum. A cross below the zero line indicates bearish momentum.
- **Divergence**: Like RSI, divergence in MACD can be a powerful signal. If the price makes a new high but the MACD makes a lower high, it's bearish divergence. If the price makes a new low but the MACD makes a higher low, it's bullish divergence.
- **Histogram**: An expanding histogram indicates strengthening momentum, while a contracting histogram suggests weakening momentum.

## Key differences between RSI and MACD

While both RSI and MACD are momentum indicators, there are some differences between the two. Let's explore RSI vs MACD.

| Feature | RSI | MACD |
| --- | --- | --- |
| Type of Indicator | Momentum oscillator | Trend-following momentum oscillator |
| Primary Focus | Speed and change of price movements; identifying overbought/oversold conditions. | Relationship between two moving averages; trend direction and momentum strength. |
| Components | Single line, plotted between 0 and 100. | MACD line, Signal line, and Histogram; oscillate around a zero line. |
| Calculation Basis | Average gains versus average losses over a period (e.g., 14 periods). | Difference between two Exponential Moving Averages (EMAs) (e.g., 12-period EMA - 26-period EMA). |
| Scale/Range | Bounded: 0 to 100. | Unbounded: Can extend indefinitely above or below the zero line. |
| Key Signals | Overbought (>70), Oversold (<30), Divergence (bullish/bearish). | Crossovers (MACD line & Signal line, MACD line & Zero line), Divergence, Histogram peaks/troughs. |
| Lag vs. Lead | Can act as a leading indicator for reversals (especially with divergence). | Generally, a lagging indicator, confirming trends after they've begun. |
| Best Use Case | Identifying potential reversals in range-bound or moderately trending markets. | Confirming trends, identifying trend changes, and measuring momentum strength in trending markets. |
| Typical Default Settings | 14 periods | 12-period EMA, 26-period EMA, 9-period EMA (for signal line). |

## How to use RSI and MACD together

[Combining RSI with MACD](https://dhan.co/blog/trading-strategies/how-to-combine-indicators-for-better-trading/) provides a more robust analysis by taking advantage of the strengths of both indicators while mitigating their individual weaknesses. They can be used together for:

### Confirming signals

Use one indicator to verify signals from the other. For example, if RSI goes into oversold territory and crosses above 30 (a bullish signal), look for a MACD bullish crossover (MACD line crosses above signal line) to confirm the potential upward movement. Conversely, if RSI crosses overbought territory and then follows it by a MACD bearish crossover (MACD line crossing below the signal line), the short signal would be strengthened.

### Identifying divergences with confirmation

One of the most powerful strategies is to search for divergence in one indicator and confirm it with the other. If you spot bullish divergence on RSI (price making lower lows, RSI making higher lows), wait for MACD to also show bullish divergence or bullish crossover as confirmation before considering entry.

### Trend and momentum analysis

Use MACD to determine the direction of the trend and its strength. When MACD rises above its signal line and the zero line, it is a sign of an uptrend. Applying RSI to seek an opportunity to buy during pullbacks when it retraces to the 40–50 zone and rebounds. In a declining market /downtrend (MACD below the signal line and the zero line), apply RSI to identify selling points as it increases to about 70, and thereafter, it declines.

### Avoiding false signals

Strong trends can hold RSI in overbought/ oversold levels for a longer period. MACD may be useful in these instances to verify whether the trend still has strength (e.g., MACD lines still divergent and above/below the zero line) before acting on an RSI overbought/oversold warning. Similarly, in turbulent markets where MACD may provide false crossovers, a neutral RSI (between 30 and 70) can be used to caution.

## Conclusion

Relative Strength Index and Moving Average Convergence and Divergence are two valuable technical analysis tools that provide different insights about the market behaviour.​ RSI and its limited scale are ideal for identifying potential overbought or oversold market conditions and indicating impending reversals. On the other hand, MACD provides an overview of the direction of the trend and momentum, albeit with a slight lag.

Although both indicators are intended to measure momentum, they are complementary and are not substitutes for one another because of their different methodologies. By using them in combination, traders can get a more comprehensive and confirmed overview of the market conditions.

## FAQs

### Is it possible to use RSI and MACD separately from each other?

Yes, both RSI and MACD can be used separately to generate trading signals or confirm market conditions. However, their combination can be a more compelling confirmation and helps to filter out less reliable signals, which makes your analysis more robust.

### What are the differences between their divergence signals?

Both indicators can point to divergence, but the context is different. In RSI divergence, when price has made a new high/low, but the RSI has not, it indicates that the momentum behind the price has been diluted, indicating a potential reversal. In MACD divergence, when the price reaches a new high/low, MACD divergence reflects the weakening of trend momentum, but it is more concentrated on the weakening of the strength of the trend, which is often followed by a trend change.

### Between RSI and MACD, which one is better for short-term trading?

RSI is often used in short-term trading to spot overbought/oversold market conditions that could cause instantaneous price responses. However, to check the strength and direction of the short-term trends, MACD can also be useful, especially the histogram. Both are used together by many short-term traders to get better insights and confirmation.

### Are there any specific settings for RSI and MACD that are best used together?

Although default settings (RSI 14, MACD 12, 26, 9) are widely accepted and a good starting point, the best settings can vary based on the asset, time period, and personal trading style. You can try some small changes in periods and backtest those on historical data to see what works best with your strategy.

### Can RSI and MACD give conflicting signals?

Yes, RSI and MACD can give conflicting signals, especially in choppy or transitional markets. For example, RSI may show an overbought state, implying that a pullback is imminent, but MACD is still showing a strong upward trend. Under these conditions, it is important to look for confirmation by looking at other indicators or price movement, or to be careful and wait until both indicators provide a clear signal before trading.
