How to choose Strike Price in Option Trading

Key takeaways
- Pick a strike based on the delta and the risk you are comfortable taking, rather than simply going for the cheapest premium.
- Use a higher delta when you have a stronger conviction and a lower delta when you are making a smaller event-driven trade.
- Read open interest on the option chain to see where support and resistance will hold.
- Check implied volatility before trading, since it decides whether buying or selling makes more sense.
The lesson all options traders learn eventually, and generally after a trade that should have worked, didn’t. The market view was spot on. The stock or index moved as expected.
But you still lost money in the trade. The problem is rarely the market view you take, but the strike price.
Selecting the best strike price for option trading is not about picking whichever option appears cheapest in the chain. It affects how much you pay, how quickly time decay impacts your trade, and how much movement in the underlying is required for you to start making money. Here, we will take you through a step-by-step process of strike selection, whether you are buying options as a directional trade or selling them for their premiums.
The three factors that affect the Strike Price
A strike price is the level at which you get the option to either buy or sell the underlying stock or index if you are the buyer or seller, respectively. That one number affects three aspects in your trade that beginners often overlook.
To begin with, it will give you the breakeven point. Secondly, it will calculate your margin expenses or premiums. Thirdly, it influences the delta of the option, the measure of its sensitivity to the underlying asset.
Choosing the wrong strike can cost you even with a right market call.
ITM, ATM, and OTM in plain terms
Options are categorised by moneyness. An In-The-Money (ITM) option already has intrinsic value; calls are ITM when their strike is below the current price, while puts are ITM when the strike is above the current price. At-the-money (ATM) strikes are the closest to the current price.
Out-of-the-money (OTM) options do not have intrinsic value and are only bets on future movement in the underlying asset. Moneyness is important because it helps you understand its relationship to the option delta. Deep ITM options have a delta of approximately 0.80-0.95.
This implies that these options move almost like the underlying. Strikes that are at-the-money have a delta of 0.50. Far OTM strikes often have a delta less than 0.20. This explains why they look so cheap but fail to pay off most of the time.
If you would like to know more about moneyness, you must read ITM vs ATM vs OTM Options explained for traders
Step 1: Anchor your strike choice to your market call and time horizon
Clearly tell yourself how many points will the underlying asset move until you load the chain. Something vague like, "Nifty will go up" will not work for you. It must be something concrete such as, "Nifty moves up by 200 points in three days."
An intraday scalp requires a strike close to the ATM since you need maximum delta sensitivity and are ready to handle the decay in case you are scalping.
When taking a trade that will run from one week to two weeks, a strike one or two intervals ITM or ATM usually balances cost against decay better than a far OTM.
Step 2: Delta, not the premium, is your risk-setting tool
The first mistake many beginners commit is that they opt for the strike price depending upon its premium. However, the delta must determine the strike price to be chosen.
When taking a high-conviction directional trade where the idea is for the option to move in tandem with the underlying, a delta between 0.60 and 0.75 works well. This is precisely what strike price selection is all about.
Choose a delta that matches the confidence level you have in the move. If you have a balanced trade with a defined stop-loss, then 0.40 to 0.50 will work. Leave the low delta of 0.25 or less for trades that you are certain will see a spike in implied volatility, such as an earnings announcement or policy decision.
These types of trades should be executed as small trades, since such strikes decay very quickly if the move does not happen in time.
Step 3: Look out for open interest walls in the chain
Open interest (OI) tells you where the market has placed its money, and this indicates areas where other traders are defending. High call OI is likely to act as resistance because traders who have written options at those strikes are protecting their positions.
High put OI tends to act as support because traders who have written the option at that level will defend their positions against any further price declines. Assuming Nifty is trading around 23,300, and you notice there is high OI at the 23,000 put and 23,500 calls. That level becomes the market wall for that expiry.
Dhan's chain view shows you the OI, change in OI, and put-call ratio on one screen, making it easy to identify these walls.
Read more about this Open Interest Indicator Explained in Detail
Step 4: Consider the implied volatility and not the premium
A premium of 150 is not necessarily expensive, and one of 40 is not necessarily cheap. The factor to consider is whether the implied volatility (IV) is high or low relative to its range. This is because IV determines the premium amount aside from intrinsic value.
It is important to consider the IV percentile before you buy options. When the IV is below 30, options become relatively cheaper, making buying options more attractive. When IV is above 60, premiums become expensive, favouring spreads or selling options rather than buying them.
As a general guideline, India VIX close to current levels of approximately 11 to 12 implies that the environment is low, and thus far OTM options for a quick spike are rare in that case.
Step 5: Choose the right strike price for buying or selling
Strike price selection differs depending on whether you are buying or selling the options.
In case you are buying the option, it is advisable to use strikes close to the ATM or have a delta above 0.40. This makes sure that your premium paid is proportionate to the move you expect.
If you are selling options, the logic changes. Far OTM strikes with a delta of 0.10 to 0.20 offer you a higher chance of being expired worthless. The downside is that you collect a small premium per lot.
Strike selection errors to avoid making
- Picking deep OTM strikes without considering their likelihood of reaching that strike before expiration, simply due to them being cheap
- Disregarding theta depreciation in the last week to expiration, regardless of the strike
- Ignoring bid-ask spreads on thinly traded strikes that may drag down your profits on the correct pick
- Choosing a strike without a contingency strategy to exit or roll it in case of an adverse move
Worked Example of Nifty Strike Selection
Assume the Nifty stands at 23,300 levels and there is an expectation of a move towards 23,500 in the next four to five days based on the index continuing above its recent support zone. Assume the current weekly lot size for Nifty is 65 lots.
Instead of immediately picking the far OTM 23,600 strike due to cheaper premiums, look at the option chain to identify the strike with a delta closer to 0.55, which is likely to be either the 23,300 or 23,350 strike, depending on the volatility for that week. This helps to remain near a one-to-one relationship with the underlying while paying less premium than for a deep ITM strike.
Place a stop-loss in case the index breaks below 23,200 and target close to the 23,500 resistance zone marked by the OI concentration on the chain. Trade the chosen strike at the size of a single lot till the setup proves itself with a few trades. Strike selection prevents only one type of risk; position sizing prevents all others.
Using Dhan's F&O margin calculator will help to find the margins required for a chosen strike before placing the order.
Conclusion
Strike price selection becomes an exercise that involves following a process: defining your view, matching risk with delta, understanding OI walls on the chain, incorporating implied volatility in strike price selection, and tailoring the approach to either buying or selling strike prices.
Once traders follow this process, they cease to pick strikes on the basis of price alone and begin to select them based on probabilities that options trading actually rewards.
FAQs
What is the safest strike price for a beginner to start with?
The best strike for beginners is usually the ATM strike. They come with a delta close to 0.50 and move in sync with the underlying without suffering any steep decay close to expiry like deep OTM options.
Should I buy ATM or OTM options?
This depends on conviction and time horizon for the trade. ATM options are suitable for a move over a few sessions, while OTM strikes only make sense for high-conviction and event-driven trades.
How does delta play a role in the selection of strike prices?
Delta determines the change in the option's price per ₹1 change in the stock/index price. A delta of 0.60 implies that the option will move around ₹0.60 for every ₹1 move in the stock/index, which helps to size the trade according to your expectation.
What happens if I pick the wrong strike price?
The trade will lose money even if the market direction is correctly identified, as the underlying did not move sufficiently fast enough to reach the strike after adjusting for time decay and premium cost.
Is OI concentration at a certain strike price a sure sign of resistance/support?
Not necessarily, as it simply shows the current position build-up on the chain. Any strong news flow or volume spike could help penetrate an OI wall, so treat it as a probabilistic signal rather than an absolute rule.












